CBAM for Indian steel, aluminium and casting exporters: the emissions data your ERP must capture
Picture a die-casting unit in Coimbatore that ships aluminium brackets to a buyer in Germany. Since January the buyer’s emails have changed. Fewer questions about tolerances, more questions about tonnes of CO2 per tonne of product, the fuel your furnace burns and who supplied your ingot. That is CBAM compliance arriving at the supplier’s door. The EU importer carries the legal obligation, but the numbers have to come from your plant, and most Indian plants do not have them in a form anyone can verify. Below: what the EU requires, which products are in scope, and what your ERP must capture per batch and per shipment.

Where CBAM compliance stands in November 2026
The EU’s Carbon Border Adjustment Mechanism ran a reporting-only transitional period from 1 October 2023 to 31 December 2025. The definitive regime has applied since 1 January 2026. It covers six sectors: iron and steel, aluminium, cement, fertilisers, electricity and hydrogen.
The mechanics sit with the EU side. An importer bringing in more than 50 tonnes of CBAM goods a year must hold the status of authorised CBAM declarant. That declarant buys CBAM certificates priced off the EU ETS allowance price, and surrenders certificates matching the emissions embedded in what it imported. Certificate sales for 2026 imports are scheduled to start in February 2027, and the first annual declaration, covering calendar year 2026, is due by 30 September 2027. The 50-tonne threshold came in through the simplification regulation published in October 2025, and the Commission says it still captures over 99% of in-scope emissions.
So nobody sends an Indian exporter a CBAM bill. Your buyer is simply working out if your goods will cost more in certificates than a competitor’s, which makes CBAM compliance a commercial issue for you. Indian steel has been under that lens for a while: Down To Earth reported in October 2026 that some smaller European buyers have paused orders while they work out the cost.
Is your product in scope? Check the CN code first
CBAM compliance starts with classification, and this is where we see the most confusion in Tamil Nadu. CBAM does not cover “everything made of metal”. It covers specific codes in Annex I of Regulation (EU) 2023/956:
| Product type | Typical CN heading | Covered by CBAM today? |
|---|---|---|
| Bars, sheets, wire, semi-finished steel | Chapter 72 | Yes |
| Tubes, pipes, structures, fittings | 7304 to 7308 | Yes |
| Screws, bolts, nuts, washers | 7318 | Yes |
| Other articles of iron or steel (forged, stamped, fabricated) | 7326 | Yes |
| Other cast articles of iron or steel | 7325 | No, but proposed for addition |
| Unwrought aluminium, bars, sheets, foil | 7601, 7604 to 7607 | Yes |
| Other articles of aluminium | 7616 | Yes |
| Machinery parts classified in chapter 84 or 85 | e.g. 8413, 8483 | No, some proposed for addition |
Two things follow. A grey iron foundry shipping castings under 7325 is outside the certificate obligation today. But in December 2025 the Commission proposed extending CBAM to around 115 more downstream CN code lines, including 7325, with obligations from 1 January 2028 if adopted. Down To Earth reports the EU Council agreed to the downstream extension in June 2026. It is not law yet, but if your castings or pump components are on that list, expect buyer questions in 2027.
What embedded emissions actually means for a plant
The EU’s guidance splits emissions into two kinds. Direct emissions come from the production processes: burning coal, coke, furnace oil, LPG or natural gas, plus process emissions from the production itself. Indirect emissions come from electricity used in production. Whether indirect emissions count towards the certificate obligation depends on whether the goods are listed in Annex II of the Regulation, so confirm this for your codes with your importer’s advisor. Capture electricity anyway; buyers ask for it.
Then there are precursors. If you melt purchased pig iron, steel scrap-based billets or primary aluminium ingot, and those inputs are themselves CBAM goods, their embedded emissions roll into your product. The EU guidance says operators must monitor precursor quantities and obtain emissions data from the supplier where the precursor is bought in. Your ingot or billet supplier now owes you a number, just as you owe one to your buyer.
Finally, a supplier that provides data is expected to keep a monitoring plan, prepare an operator’s emissions report and retain records for at least six years. Actual data must be verified by a verifier accredited by a national accreditation body in the EU before the importer can use it. If actual data is not available, the importer falls back on EU default values, and you lose any advantage your cleaner process might have earned.
CBAM compliance data your ERP must capture
This is the list we work through with engineering exporters. Think of it as the evidence trail a verifier will walk.
- Installation master data: legal entity, plant address and coordinates, the production processes and production routes in use (cupola, induction furnace, die casting, forging), and the period being reported.
- Fuel consumption by process: every receipt and every issue of coal, coke, furnace oil, LPG or gas, linked to the furnace or process that consumed it, with the emission factor and its source.
- Electricity consumption by process: meter readings per furnace or section rather than the monthly electricity bill alone, plus grid or captive source.
- Precursor purchases: quantity, supplier, batch or heat number, and the supplier’s declared embedded emissions with its supporting document.
- Production quantities by CN code: good output in tonnes per batch, per month, per CN code, with scrap and rejects separated.
- Allocation logic: how plant-level fuel and power are attributed to each production process and product, written down and applied consistently.
- Shipment link: each export Sales Invoice tied to the batches it contains, so emissions per tonne can be reported per consignment.
- Document retention: purchase bills, meter logs, calibration certificates and supplier declarations kept and retrievable for the six-year period.
Items 2, 3 and 6 are where nearly everyone struggles, because fuel is usually booked as one factory expense.
How ERPNext holds CBAM compliance data
ERPNext already records most of the physical flow. The work in a CBAM compliance project is making that flow carry emissions data without double entry by supervisors.
Items, BOMs and CN codes
The Item master has a customs tariff number field. Fill it properly for every finished good and precursor, and the CN-wise production report becomes a simple query. The BOM gives expected precursor consumption to compare against actuals.
Work Orders, Job Cards and Stock Entries
Fuel and power need to stop being expenses and become issued materials. We set up fuel as stock items and issue them through Stock Entry (Material Issue or Material Transfer for Manufacture) against the Work Order or the workstation that consumed them. Job Cards already hold the workstation and time logs, so a custom field for the furnace meter reading at start and end of each melt gives you electricity per heat. The Manufacture Stock Entry then records good output against a Batch.
Custom doctypes for emission factors and supplier declarations
ERPNext has no emissions module out of the box, so we build three small custom doctypes in a Frappe app: an Emission Factor master (fuel, factor, unit, source, valid from), a Supplier Emission Declaration (supplier, item, batch, tCO2 per tonne, attachment, validity), and a monthly Energy Allocation record that spreads common-area fuel and power across processes using the method you have documented. Batch-wise allocation then becomes a report: for each batch, sum direct emissions from fuel issued, add precursor emissions from the batches consumed, and divide by good output.
The report for your EU importer
The output is a per-shipment or per-period summary: CN code, tonnes shipped, direct and indirect embedded emissions per tonne, precursor contribution, production route and installation details. Your accredited verifier checks the numbers. Your ERP is the system of record that keeps answers consistent. It is not the verifier, and no software vendor should claim otherwise.
For foundry-specific setup of melt logs, heat numbers and rejection tracking, see our ERPNext for foundry page. Still on spreadsheets? Our guide to ERPNext for manufacturing covers the base you need first.
Who should do what
CBAM compliance fails when everyone assumes someone else owns it. A simple split that works for a ₹50 crore to ₹300 crore exporter:
- Plant head: owns the monitoring plan, the meter points and the allocation method. Signs off monthly energy data.
- Purchase: collects and renews supplier emission declarations for every precursor.
- Finance: keeps fuel and power purchase records reconciled to ERP issues.
- Export team: ensures CN codes on the Item master match the shipping bill, and sends the shipment emissions summary with each consignment.
- ERP partner: builds the custom doctypes, reports and controls.
- Accredited verifier: verifies the operator’s emissions report. Engage one early.
Our advice on sequence for CBAM compliance: classify products by CN code this month, meter your major furnaces next, then customise the ERP. Software without meter data produces confident-looking guesses.
Ready to see your CBAM data gaps? Our Coimbatore team can map your plant’s CBAM compliance data flow and show what ERPNext would need to capture. Book a free 30-minute ERPNext consultation, or get a budget first with our ERPNext implementation cost estimator.
Frequently asked questions
Is CBAM compliance mandatory for Indian exporters?
No. The legal obligation sits with the EU importer, who must be an authorised CBAM declarant above 50 tonnes a year. But the importer needs emissions data from the plant that made the goods, so in practice the exporter has to supply it.
When do EU importers start paying for CBAM certificates?
Certificate sales for 2026 imports are scheduled to begin in February 2027, and the first annual declaration with surrender of certificates is due by 30 September 2027.
Are iron castings covered by CBAM?
Cast articles under CN 7325 are not in the current Annex I. Articles under 7326 and fasteners under 7318 are. The Commission has proposed adding 7325 and other downstream goods from 2028, so foundries should prepare.
What happens if my plant cannot give actual emissions data?
The importer can use EU default values. A cleaner plant then loses the chance to show a lower carbon cost.
Can ERPNext handle CBAM compliance and embedded emissions?
Not out of the box. With fuel and power issued as stock, custom doctypes for emission factors and supplier declarations, and batch-wise reports, ERPNext can hold the data and compute per-batch figures. Verification is still done by an accredited verifier.
Does the India-EU FTA remove CBAM costs?
No. Reporting on the FTA notes that it does not exempt Indian exports from CBAM. The Commerce Ministry says India secured an assurance that any CBAM flexibilities the EU gives other countries will extend to India.
CBAM compliance: key takeaways
CBAM’s definitive regime has applied since 1 January 2026, with the first declarations due by 30 September 2027. Indian exporters do not file, but they must supply verified data on fuel, electricity, precursors and output by CN code, per installation. Check your CN codes first, because castings under 7325 are outside scope today while 7318, 7326 and 7616 are in. Treat the ERP as the data backbone for CBAM compliance and leave verification to an accredited verifier. The European Commission’s CBAM definitive regime page is the place to track rule changes.